What is the Extrusion Process?

December 14, 2022
extrusion-4.png

Often, manufactured parts are designed to be of a certain complex cross-sectional pattern, with fittings, flanges, protrusions, and flat edges that must be integrated into a particular shape with specific tolerances in the finished product. The manufacturing of these specialized shapes or cross-sections is usually accomplished using an extrusion process. This process utilizes heat, pressure, and cooling to produce a semi-liquid, or paste, to be forced through a die, and after emerging from the die, hardened to a designated temper.

The extrusion process is used most frequently to form plastic and aluminum parts or products. However, ceramics, heavier metals or alloys, and foods such as pasta, are also shaped and manufactured through the extrusion process. Essentially, as long as a material can be easily liquefied, it can be extruded.

Extrusion processing is distinct from stamping or molding, for instance, in that the extruded material will form intricate, strong, and durable fittings, parts, and pieces from brittle stock that is difficult to shape through stamping, bending, or hammering. Intricate cross-sections such as hollow tubes or solid pieces, or rods with flanges or wings are far easier to manufacture through the extrusion process. Additionally, the finished surface of extruded products is consistently of higher quality than that of stamped or molded products.

Basically, the extrusion process involves loading small pieces of raw material or stock into a hopper at one end of the extruder. In the case of the plastic extrusion process, this raw material is called pellets, and in the aluminum extrusion process, billets. The raw stock is fed from the hopper into the extruder, essentially a heated cylinder, where it is softened. A ram, usually a worm gear, forces the semi-liquid raw material through a smaller chamber, then through a shaped die. From the die, the extrusion, the string, tube, or rod of shaped stock, is cooled with water or air, along the run out table to harden. At the end of the run out table, the hardened product is cut, wound, shipped, or sent on to further refining.

Read more: What is the Extrusion Process?

Michigan

Headquarters


800-544-2220

www.paulmurphyplastics.com

info@paulmurphyplastics.com

15301 11 Mile Road, Roseville, MI 48066

Get In Touch

Follow Our Activity



ISO 9001 Certification

Quality Assurance